7 min read

HubSpot Prospecting Agent: What It Does and How to Use It

HubSpot Prospecting Agent: Setup, Costs & Results | Vested
13:37

HubSpot's Prospecting Agent can research accounts, write personalized outreach, and follow up with leads while your team is focused on other things. That's a big promise, and a lot of teams turn it on expecting pipeline to show up on its own. 

In a September 2026 HubSpot partner Show & Tell, two agencies using the agent every day shared what's actually driving their results. Rod Rodriguez of GoRizen and Juan Perez of Highbrid Media have booked meetings, closed deals, and built six-figure pipeline with it. Their message was the same as HubSpot's: the tool is only as good as what you teach it.

The short version: Prospecting Agent is not "press button, receive pipeline." Strong context, targeted lists, and a multi-channel motion make the difference.

Here's what the agent does, how to set it up so it sounds like your best rep (not a robot), and what real teams are getting out of it.

Curious what Prospecting Agent would say to your buyers?

 

What is HubSpot Prospecting Agent?

HubSpot Prospecting Agent is an AI agent inside HubSpot that researches prospects, drafts personalized outreach, and follows up for you. It works from your CRM data, the company's website and news, and buying signals like site visits and form fills. Then it writes emails grounded in that context.

You can let it send on its own or review every email before it goes out. Most teams start with review on, then loosen up once they trust the output.

It runs on HubSpot Credits. HubSpot charges 100 credits per lead the agent recommends for outreach, not per play, so you can build as many plays as you need. First-time users can opt in to 14 days of free access, which starts when you publish your first play.

What can Prospecting Agent actually do?

Think of it as an SDR that does the research and first drafts, built right into your CRM. Here's what it handles:

  • Account and contact research. Before it writes anything, the agent pulls context from the prospect's website, recent news, and your CRM history. It can also surface more contacts at a target account through connected data providers like ZoomInfo, Apollo, and Surfe.
  • Buying signals. You choose which signals each play watches, like pricing page visits, content downloads, or form fills. The agent uses them to decide who to reach out to and when.
  • Selling profiles. These store your messaging, tone, and preferred calls to action. You can build different profiles for different offers, product launches, or audiences.
  • Plays. A play is a set of instructions for who to target, what to sell, and how to reach out. You can let the agent adapt the steps based on how each prospect engages, or build the sequence yourself.
  • Personalized emails and follow-up. Follow-ups are triggered by engagement, not a fixed timer, and the agent writes in 200+ languages.
  • Workflow triggers. Any HubSpot workflow can kick off outreach. A form fill, a lead score crossing a threshold, or a deal going cold can all enroll a contact.

What it won't do is figure out your positioning for you. The agent can only personalize as well as the context you give it.

Which plays should you run first?

Start with three plays. Each one covers a different part of your funnel, and each needs its own context, tone, and follow-up.

Play

Who it targets

What the agent does

Cold outreach

Net-new contacts from a targeted list, filtered by vertical, persona, and signals

Researches each company and opens the conversation with a reason to talk

Inbound follow-up

Anyone who fills out a form

Follows up right away so no lead goes cold waiting on a rep

Closed-lost reactivation

Deals lost in a recent window (GoRizen uses 120 days)

Re-engages past prospects and tries to rebook the meeting

The mistake is running one generic play for everyone. A window and door company and a pool builder have different problems, so they should get different emails. Separate plays let you change the messaging, tone, and follow-up for each segment.

How do you train Prospecting Agent?

You train it with context. That's the foundation of any good AI output, and it's what separates a sharp, relevant email from generic AI spam. Every play should include:

  • Validated pain points. Not what you assume your buyers care about, but what you've confirmed they do.
  • ICP details. Vertical, company keywords, deal size, and buyer persona.
  • Service alignment. Which of your offers fits this segment, and why.
  • Signals. What they visited, what they downloaded, which form they filled out.
  • Warm reasons to reach out. Shared network memberships, past engagement, or site activity that makes a cold lead a little warmer before the first email.

Where does that context come from? Rod tested his pain points with Facebook messaging before they ever went into a play. Juan pulled his from AEO data, looking at which pain points were showing up in AI search prompts around his brand. Then he used Breeze Assistant to tighten the language before adding it to the play.

"We populated the pain points, confirmed them on Facebook first, and added those to the context. That's what made the messaging improve."

— Rod Rodriguez, GoRizen

If you're already doing AEO work, you're sitting on some of the best prospecting context you have. The questions buyers ask AI tools are the same pain points your outreach should lead with.

What results are teams getting with Prospecting Agent?

Two HubSpot partners showed how they use the agent day to day. GoRizen gives the agent enough context to run on its own. Highbrid Media keeps a human in the loop. Both pair it with other channels.

 

GoRizen (Rod Rodriguez)

Highbrid Media (Juan Perez)

Who they target

Home services: window and door companies, remodelers, pool builders

Leads filtered by vertical, persona, and signals

Lead source

Seamless, filtered by vertical and keyword

Apollo, brought into HubSpot

Plays

Cold outreach, inbound follow-up, closed-lost reactivation (deals lost in the last 120 days)

Cold outreach, upsell signals on current clients, "not yet" re-engagement

Context

Pain points tested with Facebook messaging, service alignment, vertical signals

Pain points from AEO data, refined in Breeze Assistant; shared network memberships as warm openers

Human review

Minimal. Enough context for the agent to write every email without manual review

Flagged leads are reviewed. Juan sends the first touch, then enrolls them

Other channels

LinkedIn (via Dripify), Google Ads, Facebook Ads, outbound calls

LinkedIn connection before outreach to help emails reach the inbox

Reach

About 1,200 companies

About 300 companies

Results

20 meetings booked · 3 active opportunities · 1 closed-won deal at $3.4K MRR · about $800K in reactivation pipeline

2 new clients · 173% more qualified leads · $23,000 increase in pipeline

GoRizen's biggest number came from a single play. For a pool client with $100K average deals and an expected close rate around 20%, re-engaging leads who had gone quiet put roughly $800K back into the pipeline.

For Highbrid, the agent filled a gap. Juan also runs it on existing clients: if a client browses a service page Highbrid doesn't deliver for them yet, the agent flags the upsell.

"Before this, we had almost nothing coming in — a few blog conversions, some form submissions. This has produced much greater results."

— Juan Perez, Highbrid Media

What should you know before you launch?

Start with real context, build each play fresh, avoid editing live plays, and launch before it's perfect. Rod and Juan learned these four lessons the hard way:

  1. Start with real context. Pain points, ICP details, signals, and service alignment. Vague context produces generic email.
  2. Don't clone plays. A cloned play carries over its old selling context, and the agent will keep referencing it in new outreach. Build each play fresh.
  3. Don't edit a live play. Changes only apply to newly enrolled contacts, and the partners found that editing an active play paused new lead suggestions for the day. Batch your edits and make them between runs.
  4. Launch before it's perfect. Get a good-enough play live and improve it based on real replies. Waiting for perfect is how pipeline never gets built.

Why doesn't Prospecting Agent work on its own?

Because buyers don't live in one channel. Both partners pair the agent with other touchpoints: LinkedIn connections and messages, paid ads on Google, Meta, and LinkedIn, and phone calls. The agent handles research and email at scale. The other channels make your name familiar before that email shows up.

A simple five-week launch plan

HubSpot runs a five-week deal sprint with its partners, and it's a good model for any team getting started:

  1. Week 1: Set a pipeline goal and build your target list.
  2. Week 2: Build and launch your first Prospecting Agent play.
  3. Weeks 3 to 5: Run outreach, iterate on the messaging, and layer in other channels.

Check in every week, not every other week. Keep a visible scoreboard for meetings, discovery calls, and deals so everyone can see what's working.

How many HubSpot Credits does Prospecting Agent use?

HubSpot charges 100 credits per lead the agent recommends for outreach. For scale, GoRizen uses about 32,000 credits a month across its plays. At 100 credits per lead, that's roughly 320 leads a month.

A few ways to keep spend under control:

  • Set a daily limit on each play. Every play has a daily cap on new contact suggestions.
  • Watch your monthly allowance. Included credits reset each month, and you can buy more in blocks of 1,000.
  • Pause if you need to. Users with billing permissions can temporarily pause credit use.

What should you measure?

Skip vanity metrics like emails sent. The partners track three things:

  • Email replies, to tell you whether your context and messaging are landing
  • Meetings booked, to tell you whether replies are turning into conversations
  • Opportunity value, to tell you whether those conversations are worth the credits

Is Prospecting Agent right for your team?

It's a strong fit if you can check most of these boxes:

  • Your CRM data is reasonably clean, and contacts are tied to the right companies.
  • You know your ICP by vertical, persona, and deal size.
  • You have pain points you've actually tested, not just assumed.
  • Someone owns the plays and will review replies and adjust every week.
  • You're willing to support email with LinkedIn, ads, or calls.

If a few of those are shaky, fix them first. The agent will scale whatever you give it, including bad data and fuzzy messaging.

Get Prospecting Agent set up the right way

The teams seeing results aren't the ones with the fanciest prompts. They're the ones who did the groundwork: clean data, tested pain points, focused lists, and a plan to support the agent with other channels.

That's the work we do every day at Vested. We help B2B teams set up HubSpot so it drives pipeline, and our AEO work surfaces the real buyer questions that make prospecting context sharper. If you want Prospecting Agent working like your best SDR, let's talk.

Turning on Prospecting Agent and getting crickets?

Frequently asked questions

Is HubSpot Prospecting Agent free?

No. It uses HubSpot Credits, at 100 credits per lead recommended for outreach. First-time users can opt in to 14 days of free access, which starts when the first play is published.

Which HubSpot plans include Prospecting Agent?

HubSpot lists it for Starter, Professional, and Enterprise subscriptions across its hubs, plus Smart CRM Professional and Enterprise. HubSpot Credits are required either way.

Can Prospecting Agent send emails without approval?

Yes. You can choose "Send without review" or have a rep approve every email first. Most teams start with review on.

What's the difference between a play and a selling profile?

A selling profile holds your messaging, tone, and calls to action. A play tells the agent who to target, which signals to watch, and how to reach out. Build a separate play for each segment you sell to.

Does Prospecting Agent work with LinkedIn?

HubSpot says the agent can support LinkedIn messages and phone calls, but email is its core channel. The partners in this article ran LinkedIn outreach alongside the agent to warm up prospects first.

How fast can you see results from Prospecting Agent?

A focused team can have a play live in about two weeks. HubSpot's partner sprint uses a five-week window from target list to pipeline, with weekly check-ins to iterate on what's working.


BUILT ON RELATIONSHIPS. DRIVEN BY RESULTS.

About Vested Marketing

Favicon - ColorVested Marketing is a HubSpot Partner agency based in Lafayette, Louisiana. At our core, we’re problem solvers: a team of engineers turned marketers who apply the same structured, data-driven approach used to design and build systems.

We provide HubSpot consulting and implementation, CRM and platform integrations, SEO and answer engine optimization (AEO), website design and development, and inbound content programs, each tied to measurable business goals across all industries. 

Related Posts

The HubSpot Connector for Claude Is Only as Smart as Your CRM

The HubSpot Connector for Claude Is Only as Smart as Your CRM

Learn how to connect HubSpot to Claude, what the connector can read and update, the prompts to try first, and the guardrails to set before rollout.

Read More
AI Didn't Break Your Marketing. It Scaled What Was Already Broken.

AI Didn't Break Your Marketing. It Scaled What Was Already Broken.

The 10 AI mistakes we fix most in client marketing accounts, from keyword cannibalization to invented analytics, plus what to do instead of each one

Read More
Top 10 HubSpot AI Use Cases for Marketing Teams

Top 10 HubSpot AI Use Cases for Marketing Teams

Discover how HubSpot AI can boost marketing with personalized content, predictive lead scoring, and automated workflows for better results.

Read More